Arduino boards Archives

Arduino boards

Showing all 15 products

Sort by

Add to Wishlist
Arduino MEGA 2560 R3 ATmel MCU ATMEGA16U2 high quality Board

54 digital input / output terminals (14 of which have programmable PWM outputs).

16 analog inputs.

4 UARTs (hardware serial ports).

16 MHz crystal clock.

Operating voltage: 6 ~ 12v.

Dimensions: 110 x 53 x 15 mm.

₹820.00
₹820.00 Add to cart
Add to Wishlist
Arduino Nano | ATmega328P Microcontroller Board

Operating Voltage (logic level): 5V

With USB cable and Soldered Connector

8 analog inputs ports: A0 ~ A7

14 Digital input / output ports: TX, RX, D2 ~ D13

1 pair of TTL level serial transceiver ports RX / TX

Using Atmel Atmega328P-AU MCU

There is a bootloader installed in it

Standard 0.1” spacing DIP (breadboard friendly).

Manual reset switch.

₹240.00
₹240.00 Add to cart
Add to Wishlist
Arduino Pro Micro ATmega32U4 5V,16Mhz new Mini Leonardo Micro-controller Development Board

ATMEGA32U4 running in 5V / 16MHz

Support Arduino IDE

Micro USB interface programming on the board

Four 10-bit ADC pin

12 digital I / O (5 PWM capability)

Rx and Tx hardware serial connection

₹330.00
₹330.00 Add to cart
Add to Wishlist
Arduino Pro Mini ATMEGA328P

Microcontroller: ATmega328

Circuit Operating Voltage: 3.3V

Clock frequency: 8MHz.

Digital I/O Pins: 14

8 analog input port: A0 ~ A7.

A pair of TTL level serial port transceiver : RX / TX.

6 PWM port: D3, D5, D6, D9, D10, D11.

Support serial download.

₹190.00
₹190.00 Read more
Add to Wishlist
Arduino Uno CH340 with Cable and Transparent acrylic case for Uno

A basic Arduino Kit including everything to get started.

It includes a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

Microcontroller ATmega328 (SMD) – Interface CH340G

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Digital I / O Pins 14 (of which 6 provide PWM output)

Analog Input Pins: 6

₹410.00
₹410.00 Add to cart
Add to Wishlist
Arduino Uno CH340 with Cable compatible with Arduino

Microcontroller ATmega328 (SMD) – Interface CH340G

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Input Voltage (limits): 5-20V

Digital I / O Pins 14 (of which 6 provide PWM output)

Analog Input Pins: 6

It includes a quality proven Arduino Cable.

₹425.00
₹425.00 Add to cart
Add to Wishlist
Arduino uno CH340 with cable,case,400 Hole Breadboard and dupont jumper wire

A basic Arduino Kit including everything to get started

It includes a Arduino uno CH340 a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

30pcs Flexible Breadboard Jumper Wires

Breadboard 400 Tie Point

High quality and in good working condition

Easy to install and use

₹580.00
₹580.00 Add to cart
Add to Wishlist
Arduino UNO R3 Board high quality-compatible with Arduino

Micro-controller : ATmega328.

Operating Voltage : 5V.

Input Voltage (recommended) : 7-12V.

Digital I/O Pins : 14 (of which 6 provide PWM output).

Analog Input Pins : 6.

.

₹370.00
₹370.00 Add to cart
Add to Wishlist
Arduino Uno R3 CH340 ATmega328p Development Board Compatible with Arduino

Microcontroller ATmega328 (SMD) – Interface CH340G

Operating Voltage: 5V

Input Voltage (recommended): 7-12V

Input Voltage (limits): 5-20V

Digital I / O Pins 14 (of which 6 provide PWM output)

Analog Input Pins: 6

₹299.00
₹299.00 Add to cart
Add to Wishlist
Arduino Uno R3 with Cable and Transparent acrylic case for Uno R3

A basic Arduino Kit including everything to get started.

It includes a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

Micro-controller : ATmega328

Operating Voltage: 5V

Input Voltage (recommended) : 7-12V

Digital I/O Pins: 14 (of which 6 provide PWM output)

Analog Input Pins: 6

₹495.00
₹495.00 Add to cart
Add to Wishlist
Arduino Uno R3 with Cable compatible with Arduino

Micro-controller : ATmega328.

Operating Voltage : 5V.

Input Voltage (recommended) : 7-12V.

Digital I/O Pins : 14 (of which 6 provide PWM output).

Analog Input Pins : 6.

₹405.00
₹405.00 Add to cart
Add to Wishlist
Arduino uno R3 with cable,case,400 Hole Breadboard and and dupont jumper wire

A basic Arduino Kit including everything to get started

It includes a Arduino uno R3 a quality proven Arduino Cable.

It includes a strong and sturdy Transparent Acrylic Case.

It includes 30pcs Flexible Breadboard Jumper Wires

Breadboard 400 Tie Point

High quality and in good working condition

Easy to install and use

₹550.00
₹550.00 Add to cart
Add to Wishlist
D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

Use BRT (Bias Resistor Transistor)

Easier into flash mode.

30% increase in radiating area

Good stability.

₹400.00
₹400.00 Read more
Add to Wishlist
LoRa ESP32 Module: OLED Display Bluetooth WIFI IOT Development Board for Arduino

The ESP32 LoRa SX1278 Module with 0.96 Inch Blue OLED Display , this series is the new development of the cost-effective networking program

Supports Sniffer, Station, softAP and Wi-Fi Direct modes

Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b

Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n

Receiver sensitivity up to – 98 dBm

UDP continues to throughput by 135 Mbps

₹1,990.00
₹1,990.00 Read more
Add to Wishlist
UNO Based ESP8266 Nodemcu Development Board For Arduino Compatible

Based on ESP-8266EX.

Arduino compatible, using Arduino IDE to program.

Support OTA wireless upload.

Onboard 5V 1A Switching Power Supply (highest input voltage 24V).

The direct use of Arduino IDE development, the same operation with Arduino UNO.

Operating Voltage: 3.3V

Digital I/O Pins: 11

Analog Input Pins:

₹360.00
₹360.00 Read more

Arduino boards

Arduino MEGA 2560 R3 ATmel MCU ATMEGA16U2 high quality Board

Arduino Nano | ATmega328P Microcontroller Board

Arduino Pro Micro ATmega32U4 5V,16Mhz new Mini Leonardo Micro-controller Development Board

Arduino Pro Mini ATMEGA328P

Arduino Uno CH340 with Cable and Transparent acrylic case for Uno

Arduino Uno CH340 with Cable compatible with Arduino

Arduino uno CH340 with cable,case,400 Hole Breadboard and dupont jumper wire

Arduino UNO R3 Board high quality-compatible with Arduino

Arduino Uno R3 CH340 ATmega328p Development Board Compatible with Arduino

Arduino Uno R3 with Cable and Transparent acrylic case for Uno R3

Arduino Uno R3 with Cable compatible with Arduino

Arduino uno R3 with cable,case,400 Hole Breadboard and and dupont jumper wire

D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

LoRa ESP32 Module: OLED Display Bluetooth WIFI IOT Development Board for Arduino

UNO Based ESP8266 Nodemcu Development Board For Arduino Compatible